NEC NDA-24298 manual Astn Assignment of Station Number, New Stn

ASTN : Assignment of Station Number

ASTN: Assignment of Station Number

1.General

This command changes the physical station number assigned to a particular LEN.

2.Precautions

1.The primary digit, the number of digits, and the kind of service (SRV = 1) which is designated by the ANPD and ASPA command affect the new station number. The new station number must be assigned according to the numbering plan data.

2.The number of Station Number (STN) digits is designated by the ASYD command, SYS1, INDEX16.

3.This command can be used only when the number of the station to be changed is in idle status.

4.Update the station number changed in this command on the data sheet in the ASDT command.

3. Data Entry Instructions

STN

The station number has been assigned by the ASDT command.

NEW STN

Enter the new station number corresponding to the existing numbering plan.

TENANT	OLD STATION NUMBER	NEW STATION NUMBER
NUMBER	(STN)	(NEW STN)	REMARKS
(TN)

CHAPTER 4 NDA-24298

Page 414

Issue 1