NEC NDA-24298 manual Modifying or Adding a PBX Alias, Assigning Network Information in Windows

ASSIGNMENT

Note: If your IPX is to reside on your existing LAN, you will need to obtain an available IP address from your System Administrator before you configure the PBX Alias.

6.2.1Modifying or Adding a PBX Alias

Note: The PBX Alias cannot have spaces in its name.

The following steps explain how to create a PBX Alias in IPX MAT.

1.From the PBX menu, select Configuration to open the PBX Administration dialog box.

2.Enter a name for the PBX Alias in the PBX Alias box.

Note: You can also define a PBX Alias by selecting the default NEXT-PBX or by modifying any other previously defined Alias from the list in the PBX Alias box. If you select a PBX Alias from the list, its related information displays in the additional fields on this dialog box. You can enter information in the Connect Timeout, Response Timeout, Pacing Timer, and Link Data Log Path fields if necessary.

3.Select TCP/IP as the Connection Type.

4.Enter the appropriate FPC (Fusion Link Point Code). 1 is the default value and should be used initially for all new IPX systems. In a Fusion Network, this setting must follow the FPC value entered into System Data SYS 1 INDEX 512.

5.Enter 120000 in the Connection Timeout text box.

6.Enter 120000 in the Response Timeout text box.

7.Enter 10000 in the Pacing Timer text box.

8.Leave the Link Data Log Path text box blank.

9.Enter the name of the host your system is using in the Host Name text box.

10.Enter 172.16.253.0 in the IP Address text box, or enter the IP Address supplied by your network administrator.

11.Enter 60000 in the IP Port text box.

12.Leave the Inter-App Resource text box blank.

13.Click Add to write the data.

14.Click Close.

15.Exit IPX MAT.

6.2.2Assigning Network Information in Windows

Before you can run the IPX MAT software, you have to configure your network information in the Windows operating system. For information on configuring network information, see the Network Circuit Card Installation Manual or talk to your network administrator. After configuring the network information, you must restart the PC before you can log in to the IPX via the IPX MAT TCP/IP connection.

NDA-24298CHAPTER 2

Page 21

Issue 1