NEC NDA-24298 manual 253 255 899

ACOC_LR : Assignment of Central Office Code – Logical Route Number

ACOC_LR: Assignment of Central Office Code – Logical Route Number

1.General

This command is used to assign C.O. line code and tie line code corresponding to particular trunks. Route Number of the ACOC command can be assigned by using Logical Route.

2.Precautions

1.Prior to this command, logical route data must be allocated by using the ALRTN command.

2.Only when logging in to the NCN (Network Control Node), this command can be used to assign the logical route data of self-Node and the other Nodes in the Fusion Network. If logging in to a LN (Local Node), data setting only for the self-node is available. (Error message is indicated if you try to write the data of other Node.)

3.The Central Office Code (COC) assigned by this command is displayed on ATTCON and also Dterm instead of the trunk number.

4.The COC assigned by this command is used to specify a trunk by the Individual Trunk Access service feature.

5.This command affects the trunk route assigned the R/L = 1 by the ARTD command.

6.The Listed Directory Number (LDN) can be assigned as COC, and is convenient to identify the trunk.

3.Data Entry Instructions

LOGICAL	FUSION	EXTERNAL	TRUNK	DIGIT CODE
ROUTE
	POINT CODE	ROUTE	NUMBER	(DC)
NUMBER					REMARKS
	(FPC)	NUMBER	(TK)	MAX. 4 DIGITS
(LGRT)
	1-253	(RT)	1-255	[0-9, *, #]
1-899
				DC

Enter 4 digits of Central Office Code.

CHAPTER 4 NDA-24298

Page 604

Issue 1