NEC NDA-24298 manual If OPC value is 16, bit values are entered as, Entered as shown below

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX				SYSTEM DATA CONTENTS
TYPE		00 - FF
	(INDEX)		DATA
(SYS)		(Hex)
	0 - 511			BIT
			0/1

		b0	1
		b1	2
		b2	4
180		b3	8
		b4	16
		b5	32
		b6	64
		b7	128
		b0	256	Note: OPC value is expressed by all bits. For example,
				if OPC value is 16, bit values are entered as
		b1	512
				shown below.
		b2	1024
181		b3	2048		b7		b6	b5		b4		b3		b2		b1		b0
		b4	4096
				SI180	0 0 0 1						0		0		0		0		= 10 hex
		b5	8192
				SI181		0		0	0		0		0		0		0		= 00 hex
	0	b6
				Enter the data into the DATA column in hexadecimal
0		b7
				numbers.
1
		b0	1
		b1	2
		b2	4
182		b3	8	Note: DPC0 value is expressed using all 14 bits. For
		b4	16
				example, if DPC0 value is 12, bit values are
		b5	32	entered as shown below.
		b6	64
		b7	128		b7 b6 b5 b4 b3 b2 b1													b0
		b0	256
				SI182	0		0	0		0		1		1		0		0	= 0C hex
		b1	512	SI183		0		0	0		0		0		0		0		= 00 hex
		b2	1024	Enter the data into the DATA column in hexadecimal
		b3	2048
183				numbers.
		b4	4096
		b5	8192
	0	b6
0		b7

NDA-24298CHAPTER 4

Page 131

Issue 1