NEC NDA-24298 manual Lang

AAED : Assignment of Announcement Equipment Data

3. Data Entry Instructions

LANG

0	= Common	1	= Japanese
2	= English	3 = German
4	= French	5 = Spanish
6	= Chinese	7	= Russian

8-15=Spare

Note: LANG is available for the Hotel appli- cation.

						RT
			C			Enter DAT route number assigned
0	= 30 seconds, and then disconnects					by the ATRK command.
1	= The connection is held until the calling party released
			R			A
		0	= Send RBT	0	= Answer Signal is not sent
		1	= Do not send RBT	1	= Answer Signal is sent

TENANT	ANNOUNCEMENT	KIND OF	DURATION OF SENDING		ANSWER	MULTIPLE
					SIGNAL		ROUTE	TRUNK
NUMBER	EQUIPMENT	LANGUAGE CONNECTION		RBT		CONNECTION
					SENDING		NUMBER NUMBER
(TN)	NUMBER	(LANG)	(C)	(R)	(A)	(M)	(RT)	(TK)
	(EQP)0-127	0-15	0/1	0/1		0/1
					0/1

EQP

Enter EQP as the service feature provided by DAT.

0		= Dead Level Number	Note: The EQP for Hotel system can
1		= Unused Number
			be changed by the AHSY command.
2		= Remote Access to PBX
			The default EQP (service name)
3		= May be used for other purposes
			is listed here.
4
		= Outgoing Trunk Busy Announcement
5-6 = May be used for other purposes
7		= Route Restriction Announcement
8-14 = May be used for other purposes
15	= Alert Service(for Hotel system)		Note
16	= Timed Reminder Set Message (for Business system)/
		Service Set-up Message (for Hotel system)		Note
17	= Service Set-up Failure Message (for Hotel system) Note
18	= Timed Reminder Cancel Message (for Business system)/
		Service Cancel Message (for Hotel Massage)		Note
19	= Service Cancel Failure Message (for Hotel system)				Note
20	= Room Cut-Off Announcement (for Hotel system)				Note

21 = Do Not Disturb Announcement (for Hotel system)Note

22 = Timed Reminder/Wake Up Call Message for Announcement Trunk 23-31 = Group Announcement (for Hotel system) Note

32 = Delay Announcement-Attendant (for U.S.A./Canada only)

33 = Not Used

34 = Automated Attendant (1st Announcement)

35 = Automated Attendant (2nd Announcement)

36 = Slumber Time-Do Not Disturb (for Slumber Time Group 1)

37 = Slumber Time-Do Not Disturb (for Slumber Time Group 2)

38 = Slumber Time-Do Not Disturb (for Slumber Time Group 3)

39 = Slumber Time-Do Not Disturb (for Slumber Time Group 4)

40 = Slumber Time-Do Not Disturb (for Slumber Time Group 5)

41 = Slumber Time-Do Not Disturb (for Slumber Time Group 6)

42 = Slumber Time-Do Not Disturb (for Slumber Time Group 7) 43-48 = Not Used

49-53 = Delay Announcement Attendant(1st Announcement)

54-58 = Delay Announcement Attendant (2nd Announcement)

59-121 = Not Used

122-125 = Multiple Announcememnt

126-127 = Not used

M

0=Single connection 1=Multiple connection

TK

TK parameter appears if M=1 is entered.

CHAPTER 4 NDA-24298

Page 616

Issue 1