NEC NDA-24298 manual Are, Used

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX					SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	0 - 511				BIT
			0/1
					b0	Timing start to dial Attendant	Note: Digits	0-9	are
						Console Assign digit used	used	with	Index
					b1
						Note: When SYS-1, INDEX 92,	17, b5
			0		b2
						b0 = “0” (Individual SYS-2
			0		b3	Table Development), prepare
						separate SYS-2 Programming
						Sheets for each Tenant (TN).
			0		b4	Not used
	322					Tone to be sent when the handset has been lifted via the Station
						on which CALL BLOCK service is set.
					b5
						0/1 = DT/SPDT
						Note: Valid since the release 5 software.
						Tone to be heard after the access code forTone Block is dialed
					b6	0/1 = SPDT/DT
						Note: Valid since release 5 software.
					b7	Call Return in case of station-to-station call
						0/1 = Out/In Service
	323	00				Not used
1
	~	~				~
	369	00				Not used
					b0	Expanded SMFN service
						0/1 = No/Yes
					b1	Delete ARNP RTO on MCI
						0/1 = No/Yes
					b2	Non-CCIS originated RT/TK number in SMDR
						0/1 = No/Yes
	370
					b3	Att. outbound loop to loop
						0/1 = No/Yes
					b4	Release guard timer for S/L
					b5	MTC = 0 ⋅ 15 milliseconds
					b6	MTC ⋅ 64 milliseconds
					b7	Default 384 milliseconds
	371	00				Not used
	~	~				~
	387	00				Not used

NDA-24298CHAPTER 4

Page 153

Issue 1