NEC NDA-24298 manual Auidn Assignment of User ID data for NDM

AUIDN : Assignment of User ID data for NDM

AUIDN: Assignment of User ID data for NDM

1.General

This command is used to assign the User ID data such as user name and password for the purpose of logging in to PBX by the MAT. Also, a remote LN is allowed to access to the NCN via the User ID data programmed in AUIDN. Once programming the User ID data, User ID data entry is necessary to login from the next time.

2.Precautions

1.Prior to this command, NDM block is assigned at SYS1, INDEX514 in ASYDL.

2.ASCII code is available for “User Name”.

3.In case the login information is assigned in NDM data, the data is valid in the whole Fusion network. Data assignment/deletion is activated only in the NCN (Network Control Node).

4.In Fusion Network system, User ID in both LDM and NDM data is available. When the same User ID duplicates in LDM and NDM, only the login information in the NDM data is to be effective.

5.When assigning login information to NDM data, all the User ID in the NCN and LNs is to be checked. If the specified User ID duplicates to the existing one, error message is indicated. If you want to use this User ID in NDM data, it must be deleted from LDM data beforehand.

6.A maximum of 2,047 User ID data can be assigned in NDM data per a Fusion Network. In case login information for both LDM and NDM is assigned by AUIDL and AUIDN command, maximum 2174 User ID data (127 User IDs in LDM + 2047 User IDs in NDM) can be assigned per a Node.

3.Data Entry Instructions

USER NAME Assign the user name via 16 bytes ASCII codes

GRADE

Not used.

YEAR, MONTH, DAY

Enter the date when assigned the data

USER NAME	PASSWORD	GRADE YEAR MONTH DAY
MAX. 16 DIGITS	MAX. 8 DIGITS
		0

PASSWORD

Enter the password two times for sure in the MAT display.

The assigned password is displayed as “ ” on the MAT.

NDA-24298CHAPTER 4

Page 903

Issue 1