NEC NDA-24298 manual = No Retry no data retransmission for data

				ASYDL : Assignment of System Data into Local DM (LDM)
	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX						SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	512 - 1535				BIT
			0/1
						SDT card accommodation
						0/1 = Not accommodated/Accommodated
	531					b1 →	MG1, b3 → MG3, b5 → MG5, b7 →	MG7
						Note 1: The SDT card can be mounted in the odd MG
							only.
	532					Fusion Point Code (FPC) of the Center Node (CN) for
						the Centralized Management Report-Fusion
	533	00				Not used
						Stop Network Data Memory Broadcasting to LCNs
						from NCN
						0/1 = No/Yes
						Note:	This bit stops the automatic broadcasting of
							Network Data Memory from NCN while
							network commands are being programmed.
					b0		This does not stop the NCN from verifying
							data at the LCN, but stops the data
							automatically downloading to the LCNs.
						(For IPX-UMG system)
						0 = No Retry (no data retransmission) for data
						copy error
1						1 = Retry in service (for dual LAN system)
						0 = Data broadcasting at every NDM command
					b1	execution
						1 = Broadcasting by CBCN command execution
	534							Note
					b2	0 = Data Broadcasting via CMP
						1 = Data Broadcasting via SP		Note
						0 = System Message unnecessary for error during
					b3	"Periodic Refresh"
						1 = System message necessary for error during
						"Periodic Refresh"		Note
					b4	System Message Output
						0/1 = Out of service/In service		Note
					b5
					b6
						0 = NDM Data en bloc broadcasting (from NCN to
					b7	All LNs)
						1 = NDM Data individual broadcasting
						(from NDN to the LN)
	535-575	00				Not used

Note: This data is valid for IPX-UMG system.

NDA-24298CHAPTER 4

Page 177

Issue 1