NEC NDA-24298 manual Algsl Allocation of Telephone Station Data for LDM

ALGSL : Allocation of Telephone Station Data for LDM

ALGSL: Allocation of Telephone Station Data for LDM

1.General

This command assigns the data pertaining to the relationship between Telephone Station Number (TELN) and the physical station.

2.Precautions

1.This Telephone Number can be used in the self (local) node only. Use the ALGSN command if the Telephone Number for the Fusion network is required.

2.The TYPE parameter designates the programming method of the physical station. (The result is the same whichever method is selected.) When TYPE = 1 (LENS) is selected, the physical station which accommodates the Telephone Station Number (TELN) is specified by the LENS. When TYPE = 2 (STN) is selected, the physical station number (STN) is used.

3.The system data assignment (ASYDL, SYS1, INDEX513 Data 01 Hex) is needed to provide the Local Data Memory (LDM).

4.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data in this command is common for all tenants (ASYDL command, SYS 1, INDEX 800, bit0 = 1), assign TN parameter as data “1” for all tenants.

NDA-24298CHAPTER 4

Page 433

Issue 1