NEC NDA-24298 manual Route Number Trunk Data, SRV bit7 = 1 is assigned, Npi, Eccis

CDN

ARTI : Assignment of Trunk Application Data

ROUTE NUMBER

TRUNK DATA

(Australia only)

Additional Service Selection

	bit 0 = Advice of Charge (AOC)
	0 = Valid		1	=	Invalid
	bit 1= Malicious Call Trace (MCT)/Malicious Call Iden-
32 SRV		tification (MCID)
	0 =	Valid	1	=	Invalid
	bit2-bit6 =		Not used
	bit7	= For TON and/or NPI
	0 =	Invalid	1	=	Valid

Note: Input this data by a decimal.

Type of Number

0 = Unknown

	1	=	International Number
	2	=	National Number
	3	=	Network Special Number
33 TON	4	=	Subscriber Number	5 = Not used
	6	=	Abbreviated Number
	7	=	Reserved for Extension

Note: This data is effective when ARTD, INT = 4 and

SRV bit7 = 1 is assigned.

Numbering Plan Identification

0 = Unknown

			1	=	ISDN/Telephony Numbering Plan
			2	=	Not used
			3	=	Data Numbering Plan
			4	=	Telex Numbering Plan
			5-7	=	Not used
34	NPI		8	=	National Standard Numbering Plan
			9	=	Private Numbering Plan
		10-14 =			Not used
			15	=	Reserved for Extension
		Others =			Not used
		Note:			This data is effective when ARTD, INT = 4 and
					SRV bit7 = 1 is assigned.
35	L/T	Local/Toll (Russia only)				0	0	0	0
		When assigning this data, always enter zero (0).
		Event Based CCIS (E-CCIS)
36	ECCIS	0	=	Out of Service
		1	=	In Service
					NDA-24298				CHAPTER 4
									Page 649
									Issue 1