DPM 9400 - User Manual
2.Press the Jog Dial again to access the available Keyword sets. The currently assigned set is displayed:
3.Move the Jog Dial to scroll to the Keyword set you want to assign.
4.Confirm the new assignment by pressing the Jog Dial and to return to the DPM main menu. The menu entry displays the new Keyword set:
This Keyword set is now assigned automatically to any new dictation file.
Note: The Linked Keyword setting and the Barcode into Keywords setting do not overrule each other. If the DPM has been configured with both settings, you will have to scan in the barcode information first (mandatory setting). To overwrite the barcode information with a Keyword set, enter the Keyword menu manually and change the assignment.
Recording spoken instructions
Spoken instructions can be compared to comments which are recorded by the author during dictation. They are stored within the dictation sound file at the position in the sound file where the instruction was actually recorded. Examples for spoken instructions are 'insert a paragraph here' or 'correct spelling is Z E L A Z O W S K I'.
DPM 9400 supports the recording of spoken instructions for your dictations. Spoken instructions can only be inserted in Recording mode.
To insert an instruction, do the following:
1.Make sure that the DPM is in Recording mode and that the device is disconnected from your PC. Otherwise the DL/S.Instr button has the download function.
2.Press and hold the DL/S.Instr button for at least 1 second to insert your spoken instruction.
3.Keep the button pressed as long as you record your spoken instruction. When you are finished, release the button and continue with your normal dictation.
A spoken instruction appears as a thick horizontal bar on the status bar of the DPM display. The pictures below show the DPM display while a spoken instruction is being recorded and after you have returned to normal recording.
4.To insert another spoken instruction, follow the steps from above.
Recording spoken instructions in Overwrite mode
When Overwrite mode is enabled on your DPM, the behavior is as follows:
•Spoken instructions will be overwritten, partially or completely, without any warning.
•When you start normal recording inside a spoken instruction and finish recording before you have reached the end of the spoken instruction, the instruction is split into two parts.
23
