NEC NDA-24298 manual 03H →, Bit Memory Block

ASYDN : Assignment of System Data in Network Data Memory

SYSTEM	SYSTEM	DATA	BIT
	DATA		CORRESPONDING
DATA		(DATA)
	INDEX		DATA		SYSTEM DATA CONTENTS	(MDATA)
TYPE		00 – FF
	(INDEX)
(SYS)		(Hex)	DATA 0/1	BIT
	0 – 1535
	322	00			Not used

~	~		~
511	00		Not used
512	00		Not used
513	00		Not used
		b0	Local Data Memory (LDM) usage. Assign data “1” (the
			memory block is used) for the corresponding memory block.
		b1
		b2	Note: Necessary data for the programming
		b3		commands for NDM. When the Network Data
				Memory is not enough, change the value from
		b4
				03H →	07H → 0FH → 1FH. Usually 01H is
		b5
				assigned.
514	01	b6
				bit	Memory Block
1				b0	Memory Block #0
		b7		b1	Memory Block #1
				b2	Memory Block #2
				b3	Memory Block #3
				b4	Memory Block #4
515-532			Not used
			FPC that accommodates center VND (1~253)
533
			Note: Assign the FPC of ACDP accommodated node.
534-582			Not used.
		b0~b6	Not used.
			Node that collects the billing of SMDR activated in a Fusion
583			network.
		b7	0 = the node accommodating the calling party
			1 = the node accommodating the outgoing trunk or the node
			accommodating the called party
584-799			Not used.

CHAPTER 4 NDA-24298

Page 918

Issue 1