NEC NDA-24298 manual Acsal Assignment of Connection Service Index a for LDM

ACSAL : Assignment of Connection Service Index A for LDM

ACSAL: Assignment of Connection Service Index A for LDM

1.General

This command assigns the call termination for CAS Line and Direct-in Termination (Day Only) for the Local Node (LN) in Fusion network.

2.Precautions

1.The ACFR command assignment is also required to assign the trunk incoming call termination service feature.

2.CAS data at the Satellite Station

(a)It is necessary to set the TEC (Telephone Class) of the CAS Line to “15” in the ASDT command.

(b)A ring-down incoming call from a C.O line is terminated to the CAS Line.

3.When assigning CSIA = 3 (Direct-in Termination-outside (Day Only)), the ADC should be assigned by the ASPD command.

4.Use the ACSIL command instead of this command if Direct-in Termination (Day and Night Mode) or Direct-in Termination (Night Mode) is required.

3.Data Entry Instructions

CSIA

1 = CAS Line

2 = Direct-In Termination (Day only)

3 = Direct-In Termination-Outside (Day only) 4-7 = Not used

UGN

Fixed to “1.”

ADC

Enter the abbreviated digits assigned by the ASPD command.

LOGICAL				CONNECTION	TERMINATING STATION		ABBREVIATED
	TRUNK			SERVICE
ROUTE					USER	TELEPHONE	DIGIT CODE
	NUMBER			INDEX A
NUMBER					GROUP			(ADC)
		(TK)		(CSIA)		NUMBER
(LGRT)					NUMBER		MAX. 4 DIGITS
				1-7		(TELN)
					(UGN)
1	0	0	1	1 or 2
2				3	1		0	0	1	1

CHAPTER 4 NDA-24298

Page 758

Issue 1