NEC NDA-24298 manual Default Data for Each Line/Feature Button, KEY Default Data

AKYD_T : Assignment of Key Data for Dterm – Telephone Number

7.A Multi-Line key (the key for My Line and Sub Line) on the Dterm can be assigned as Prime Line. If the

Prime Line is not assigned, the My Line serves as the Prime Line. When the user goes off-hook, the Prime Line is automatically selected on the Dterm.

8.A virtual line can be assigned as a Sub Line of the Dterm. The virtual line can be used the same way as the My Line for outgoing calls and other service operations. Note

Note: Virtual Line --- A virtual LENS exists only in memory, but does not exist physically. Data can be assigned but no hardware is required.

Example: LENS = 000311. The virtual LENS is assigned by the ASDT command in the same way as an ordinary line. (The telephone class is TEC = 18: Virtual Line)

9.If the station user accepts the default settings, the data assignment of this command is not required. The default data for each line/feature button is shown below.

Table 4-15 Default Data for Each Line/Feature Button

KEY	DEFAULT DATA	KEY	DEFAULT DATA
NO.		NO.
1	CALL PICKUP	9	PRIME LINE
2	CALL FORWARDING - BUSY LINE	10	SPEED CALLING ONE-TOUCH
3	CALL FORWARDING - ALL CALLS	11	SPEED CALLING ONE-TOUCH
	CALL FORWARDING - DON’T ANSWER
4	EXECUTIVE RIGHT OF WAY	12	SPEED CALLING ONE-TOUCH
5	VOICE CALL	13	SPEED CALLING ONE-TOUCH
6	MESSAGE REMINDER	14	SPEED CALLING ONE-TOUCH
7	SAVE AND REPEAT	15	SPEED CALLING ONE-TOUCH
8	LAST NUMBER CALL	16	SPEED CALLING - SYSTEM

10.The ability to assign Sub Line appearances across module groups is available when ASYD command SYS1, INDEX321, bit0 = 1 is assigned. Stations can appear on Dterm which accommodated the different

module group within the same IMG.

11.When assigning the line/feature buttons as function keys, take the following precautions:

(a)My Line key must be programmed.

(b)Not used line/feature buttons should be assigned as KYI = 0 (Not used)

(c)The following function keys are basically fixed:

FKY = 13: CONF (Three - Way Calling)

FKY = 18: TRANSFER (Call Transfer - All Calls)

FKY = 20: HOLD (Non - Exclusive Hold/Exclusive Hold)

FKY = 28: ANSWER

FKY = 51: MIC

FKY = 52: SPEAKER

FKY = 57: RECALL

CHAPTER 4 NDA-24298

Page 454

Issue 1