NEC NDA-24298 manual Attd Assignment of Trunk Test Data, When TYPE=1, Resp, RT Type

ATTD : Assignment of Trunk Test Data

ATTD: Assignment of Trunk Test Data

1.General

This command assigns, deletes, and displays trunk connection test data.

2.Precautions

It cannot be executed to overwrite the existing data in this command.

3.Data Entry Instructions

When TYPE=1

TYPE

1 = Trunk Test Parameters

2 = LENS of the LTST circuit card

LGRT

Enter the Logical Route Number when RT TYPE=2 is assigned.

RESP

1 = Test Tone (Continuous 1kHz Tone)

2 = Ring Back Tone

3 = Time Over (No Tone) Note

INFORMATION	ROUTE	ROUTE	LOGICAL	RESPONSE
			ROUTE		DIAL CODE
TYPE	TYPE	NUMBER		PATTERN
			NUMBER		(DC)
(TYPE)	(RT TYPE)	(RT)		(RESP)
			(LGRT)		Max. 24 Digits
1/2	1/2	1-255		1-3
			1-899
1
RT TYPE			RT

1	= Route Number	Enter the Route Number
		when RT TYPE=1 is
2	= Logical Route Number
		assigned.

Note: Each trunk is automatically tested eight seconds after the previous digits have been sent out. If Test Tone (TT) or Ring Back Tone (RBT) has been acknowledged, an error is indicated.

CHAPTER 4 NDA-24298

Page 738

Issue 1