NEC NDA-24298 manual Aisd Assignment of Individual Speed Calling Data

AISD : Assignment of Individual Speed Calling Data

AISD: Assignment of Individual Speed Calling Data

1.General

This command assigns the speed dial number (of the Speed Calling - Station service feature) for a station, instead of a station user’s registration. This command also allows a maintenance person to monitor present user settings.

2.Precautions

1.The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.

2.The station number (STN) specified on this command should be assigned as a master station (MST) by the AISA command.

3.The data range of the SPD parameter on this command varies depending on the number of memory-blocks assigned by the AISA command. (One memory-block contains ten memories which store ten different speed dialing numbers)

3. Data Entry Instructions

STN

Assign the station number designated as a master station (MST/SLV = 1) by the AISA command.

SPD

When assigning the parameter BLOCK = 1 in the AISA command, assign any data in the range of 00-09 to this parameter.

When assigning the parameter BLOCK = 2 in the AISA command, assign any data in the range of 00-19 to this parameter.

TEL

The dial number to be transmitted by the system when a station user dial Speed Calling-Station access code + SPD.

	STATION				SPEED
TENANT					CALLING	TELEPHONE NUMBER (TEL)
NUMBER	NUMBER				DIGIT CODE
						MAX. 24 DIGITS
(TN)	(STN)				(SPD)
					00-99
1	2	0	0	0	00	1	2	3	4	5

CHAPTER 4 NDA-24298

Page 722

Issue 1