NEC NDA-24298 manual Aizp Assignment of Internal Zone Paging Data, Izpg, Izpstn, Izptn

AIZP : Assignment of Internal Zone Paging Data

AIZP: Assignment of Internal Zone Paging Data

1.General

This command assigns Internal Zone Paging group data. If the designated group number has already been assigned, the current data is displayed. If new data is to be assigned, the old data must be deleted before entering new data.

2.Precautions

1.Each Internal Zone Paging group must be composed of Dterm station (TEC = 12).

2.A maximum of 24 stations can be assigned to one Internal Zone Paging group.

3.A maximum of 99 groups can be assigned to one tenant.

4.One Dterm station can be assigned to multiple Internal Zone Paging groups.

5.Regardless of the tenant data table development, any Dterm station in the system can be assigned to an Internal Zone Paging group.

3.Data Entry Instructions

IZPG

Enter the group number with a range from 1 to 99.

IZPSTN

Enter the station number.

TENANT NUMBER	INTERNAL ZONE	NUMBER OF	INTERNAL ZONE	INTERNAL ZONE
(TN)	PAGING GROUP	STATIONS (CNT)	PAGING TENANT	PAGING STATION
	(IZPG) 1-99		NUMBER (IZP TN)	NUMBER (IZP STN)
				MAXIMUM 5 DIGITS
		1
		2
		3
		IZPTN

Enter TN number of Internal Zone Paging station.

NDA-24298CHAPTER 4

Page 493

Issue 1