NEC NDA-24298 manual Aspa Assignment of Special Access Code, Service Feature SRV SID NND NND1

ASPA : Assignment of Special Access Code

ASPA: Assignment of Special Access Code

1.General

This command determines the kind of service and Access Code to execute.

2.Precautions

1.This command is used for the Business Application. AASP/AGSP commands are used for Hotel Applications.

2.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. Enter the tenant number which is affected by this command.

If data for this command is common for all tenants (ASYD command, SYS1, INDEX92, bit1 = 1), assign the TN parameter as data “1” for all tenants.

3.The access code for C.F.-Busy Line and C.F.-Don’t answer service should be assigned by the ASYD command, SYS1 INDEX5, bit0=0 (Same) or 1 (Separate).

4.The access code for Call Back and OG Trunk Queuing service should be assigned by the ASYD command, SYS2, INDEX4, bit0=0 (Separate) or 1 (Same).

5.When assigning the station number, use the command ASPA to assign the access code for stations.

Note: For the station number (ex. 3xxx)

ANPD	1st.: 3	CI: 1 (N) & 2 (H)	NND: 4
ASPA	ACC: 3	CI: 1 (N) & 2 (H)	SRV: 1 (STN)	NND: 4

6.The following shows the rules of NND/NND1 data for Speed Calling-System and Call Park Remote Retrieval.

SERVICE FEATURE	SRV	SID	NND	NND1
Speed Calling-System	2	15	NND is the number of digits of	NND1 is the number of digits
			the access code (ACC)	abbreviated digits code (ADC)
Call Park Remote	2	63	NND is the number of digits of
Retrieval Code			the access code (ACC)

7.For the following service features, the maximum number of digits is to be assigned in the parameter NDD.

SERVICE FEATURE	SRV	SID	MAX. NND
Account Dial Code	0	41	15
Authorization Code/Forced Account Code	2	42	15
Attendant Manual Override	2	60	5

8.The variable parameter appears on the MAT depending on the data in the parameter SRV.

CHAPTER 4 NDA-24298

Page 214

Issue 1