NEC NDA-24298 manual Pause after KP sending Msec

ALRNN : Assignment of Logical Route and Route Class Data for NDM

LOGICAL ROUTE (LGRT) 1-899
FUSION POINT CODE (FPC) 1-253										REMARKS
ROUTE NUMBER (RT) 1-255
		Pause after KP sending								Note: Use this when
		0		=	48 msec.	1	=	56 msec.		ONSG/INSG =
		5		=	88 msec.	6	=	96 msec.	Note	4.(MF)
		7		=	104 msec.	8	=	112 msec.
		12		=	144 msec.	13 =		152 msec.
		14		=	160 msec.	15 =		168 msec.
		(In case of MFC)
74	KPPT	0		=	12.0 sec.	1 =		5.5 sec.
		2		=	7.0 sec.	3	=	8.5 sec.
		4		=	10.0 sec.	5	=	11.5 sec.
		6		=	13.0 sec.	7	=	14.5 sec.
		8		=	16.0 sec.	9	=	17.5 sec.
		10		=	20.0 sec.	11 =		22.0 sec.
		12		=	24.0 sec.	13 =		26.0 sec.
		14		=	28.0 sec.	15 =		30.0 sec.
		Stop Code
75	STC	0-11= Not used				12 =		MF		Use this when ONSG/
			13=		Not used	14 =		DTMF		INSG = 4. (MF)
			15=		MF (for MF signaling)
76	MC	MP Start Cause								Always set data “0.”
		0		=	As per ST	1	=	Not used
77	MT	MF Frequency								Use this when ONSG/
		0		=	DTMF (4⋅ 4)	1	=	MF (2 out of 6)		INSG = 4.(MF)
										This data is effective
78	TONE	TONE Designation for TRK Call Termination								when 2 (Second Dial
		0		=	DT	1-15= Not used				Tone) is set in ARTDN,
										ISGS = 3.
		Sender Prepares
		0		=	Standard	1	=	600 msec.
		2		=	800 msec.	3	=	1000 msec.
		4		=	1200 msec.	5	=	1400 msec.
		6		=	1600 msec.	7	=	1800 msec.
		8		=	2000 msec.	9	=	2200 msec.
		10		=	2400 msec.	11 =		2600 msec.
		12		=	2800 msec.	13 =		3000 msec.
79	PPTM	14		=	3200 msec.	15 =		3400 msec.
		(In case of MFC)
		0		=	24.0 sec.	1	=	5.5 sec.
		2		=	7.0 sec.	3	=	8.5 sec.
		4		=	10.0 sec.	5	=	11.5 sec.
		6		=	13.0 sec.	7	=	14.5 sec.
		8		=	16.0 sec.	9	=	17.5 sec.
		10		=	20.0 sec.	11 =		22.0 sec.
		12		=	24.0 sec.	13 =		26.0 sec.
		14		=	28.0 sec.	15 =		30.0 sec.

NDA-24298CHAPTER 4

Page 563

Issue 1