NEC NDA-24298 manual Should be assigned

ASYD : Assignment of System Data

	SYSTEM				BIT
SYSTEM			DATA	CORRESPONDING
	DATA
DATA			(DATA)		DATA
	INDEX						SYSTEM DATA CONTENTS
TYPE			00 – FF
(SYS)	(INDEX)		(Hex)	DATA
	0	– 511				BIT
				0/1
				0		b0	Not used
							Same Special Access Code Data	Table Development:
				0		b1	(ASPS command)	Common or Separate
							0/1 = Common/Separate	Day/Night Data Ta-
								bles.
							Call Forwarding Service by Calling
						b2	Number Data (AFCP command)
								Note: When data
							0/1 = Common/Separate
								tables are
		76
				0		b3
								designated as
								“Common”,
				0		b4
								the Day mode
				0		b5
								designation
				0		b6	Not used	must be used
								in the
								respective
				0		b7		commands.
1
						b0	Day/Night mode change via the Attendant Console handset jack
							0/1 = Not Required/Required
				0		b1	Not used
							MW Refresh
						b2	0/1 = Required/Not Required
		77					Note: When message Waiting Lamp is provided, this data
							should be assigned “0."
				1		b3	Service Module Interface
							0/1 = Required/Not Required
				1		b4	Module in which PFT card is mounted
				1		b5	PIM (Always assign “11.")
				0		b6	Not used
				0		b7

CHAPTER 4 NDA-24298

Page 92

Issue 1