NEC NDA-24298 manual Asfc Assignment of Service Feature Restriction Class

ASFC : Assignment of Service Feature Restriction Class

ASFC: Assignment of Service Feature Restriction Class

1.General

This command assigns the Service Feature Restriction Class (SFC) for the Service Feature Index (SFI).

2.Precautions

1.Table 4-8provides the service feature name that corresponds to the SFI. Since the service feature indicated “-” in the table may not always be “Not used” index, do not enter RES = 1 for “-” for the indicated SFI to prevent unexpected service feature effects.

2.Data can be entered on a Day/Night basis if specified in ASYD command, SYS1, INDEX75, Bit 1=1.

3.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX93, bit0=1), assign the TN parameter as data “1” for all tenants.

4.The displayed Service Feature Class (SFC) corresponds to the one assigned by the ASDT command.

5.The restriction data (RES) is entered in the text box where RSC and RRI cross.

NDA-24298CHAPTER 4

Page 395

Issue 1