NEC NDA-24298 manual Aispn Assignment of Incoming Selection Pattern Data for NDM

AISPN : Assignment of Incoming Selection Pattern Data for NDM

AISPN: Assignment of Incoming Selection Pattern Data for NDM

1.General

This command is used to assign additional digits information with respect to the Incoming Selection Translation Pattern Number (PNI). The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.Since the PNI is an intermediate parameter to the ASTPN command, assign the PNI for the incoming route number by the ASTPN command before assigning the AISPN command.

2.The system processes the ASTPN/AISPN command prior to the numbering plan data. Thus, if the LCR access code is added to the received numbers by the ASTPN/AISPN command, the system processes the LCR related command such as ASPAN/AFRSN/AOPRN.

3.Data Entry Instructions

PNI

Enter the PNI assigned by the ASTPN command.

DC

Enter desired additional numbers within 4 digits.

INCOMING SELECTION TRANSLATION PATTERN NUMBER	ADDITIONAL DIGIT INFORMATION
(PNI)	(DC)
1-15	MAXIMUM 4 DIGITS

1

REMARKS

CHAPTER 4 NDA-24298

Page 356

Issue 1