NEC NDA-24298 Oflg, Route Office Code Office Code, Change Pattern Advancing Office, Data

ASDC : Assignment of Six Digit Least Cost Routing Data

3. Data Entry Instructions

	KIND
					RA
0	= PFX (Prefix)			Enter RA as the route advancing order
1	= SCC (MCI, SPRINT)
					OFFICE
			OPR
					Enter the office code
		Enter the OPR assigned
		by the AFRS command

OFLG

The details of this parameter are shown below.

INPUT = Input office code can be assigned. ALL = All office code can be assigned.

KIND OF	TIME OF DAY	SELECTION	ROUTE	OFFICE CODE OFFICE CODE		DESIGNATING
SELECTION	CHANGE	PATTERN	ADVANCING	(OFFICE)	FLAG (OFLG)	DATA
(KIND)	PATTERN	NUMBER	ORDER	200-999	INPUT/ALL	(EFFECT)
	NUMBER	(OPR)	(RA)
	(TDPTN) 0-7	0-4000	0-7

TDPTN

Enter data “1-7” if TDPTN/PTN is assigned by the ATCP/ACMO command, otherwise “0”. Different TDPTN data can be assigned to a single OPR.

EFFECT

Enter the data (EFFECT) in the space of the corresponding office code. The meaning of data varies depending on the KIND parameter.

· When parameter KIND is assigned as PFX:

0 = an additional digit is not required for access to an FX line.

1 = the digit “1” is required as a prefix for access to an FX line.

2 = the digit “1” is required as a prefix for access to an FX line (display only). · When parameter KIND is assigned as SCC:

0 = the office code is not allowed for the area code dialed.

1 = the office code is allowed for the area code dialed.

CHAPTER 4 NDA-24298

Page 328

Issue 1