NEC NDA-24298 manual Service Index SID, Kind

ASPAL : Assignment of Special Access Code for LDM

Note 4: When SRV = SSC (Service code), SID56 (Floor Service) is assigned

SERVICE INDEX (SID) 1-63

56

NO.1

NO.1

(Kind of Assignment Number)

Available numbers are 0-15.

This data is used to assign Floor Service data by the ASPF command.

Note: When programming Floor Service data, ASYD SYS1

INDEX 165, bit7=1 must have been assigned.

Note 5: When SRV = SSC (Service code), SID57 (Split Access) is assigned

SERVICE INDEX	NO.2	KIND
(SID) 1-63
57

NO.2

This parameter specifies the number (0-63) of the access code being assigned for mutual access. This parameter serves as a counter for the access codes being assigned.

Note: This parameter is used when assigning the details of the service by the ASPS command.

KIND: (0-3)

This parameter specifies the Split Access Parameter Classification. The data to be assigned here depends on how the Guest and Administration stations are differentiated.

The Guest and Administration stations may be assigned to separate TNs, RSCs, and/or SFCs, or they may only be differentiated by their respective designations as Administration or Guest.

0:Administration/Guest

(Assign this if the access code is to be shared between Guest

and Administration with no correspondence to TN, RSC or SFC.)

1:TN

(Assign this if the access code is to be shared among specified TNs)

2:RSC

(Assign this if the access code is to be shared among specified RSCs)

3:SFC

(Assign this if the access code is to be shared among specified SFCs)

For detailed information on Hotel Service, refer to the AASP command.

NDA-24298CHAPTER 4

Page 241

Issue 1