NEC NDA-24298 manual Acpen Assignment of Call Pickup Expand Group Data for NDM

ACPEN : Assignment of Call Pickup Expand Group Data for NDM

ACPEN: Assignment of Call Pickup Expand Group Data for NDM

1.General

This command assigns the Call Pickup Expand Group data for Fusion Service. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.Prior to this command, assignments of stations are required by the ACPGN command.

2.A maximum of 100 stations can be assigned in a Call Pickup Expand Group.

3.There is no limit to the number of Call Pickup Expand Groups.

4.The access code of the Call Pickup Expand Group is assigned by the ASPAN command SRV = SSCA, SIDA = 63.

5.Either Call Pickup Expand Group for LDM or Call Pickup Expand Group for NDM can be executed in a system. (Both services can’t coexist in a system.)

3.Data Entry Instructions

UGN

Fixed to 1

TELN

A Telephone Number of Call Pickup Group member

USER GROUP NUMBER	TELEPHONE NUMBER
(UGN)	(TELN)
	Max.16 digits

1
NUMBER	TELE-	NUMBER	TELE-	NUMBER	TELE-	NUMBER	TELE-
OF	PHONE	OF	PHONE	OF	PHONE	OF	PHONE
STATIONS	NUMBER	STATIONS	NUMBER	STATIONS	NUMBER	STATIONS	NUMBER
(CNT)	(TELN)	(CNT)	(TELN)	(CNT)	(TELN)	(CNT)	(TELN)
2		15		28		41
3		16		29		42

Note: Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.

NDA-24298CHAPTER 4

Page 715

Issue 1