NEC NDA-24298 manual Amat Assignment of Master Attendant Data, Atn

AMAT : Assignment of Master Attendant Data

AMAT: Assignment of Master Attendant Data

1.General

When more than one Attendant Console has been installed for one tenant, this command assigns a Master Console for controlling the Day/Night function of all the Attendant Consoles on a tenant basis.

2.Precautions

1.This assignment is necessary when Day/Night changeover is controlled by a Master Console (the ASYD command, SYS 2, INDEX 2, bit2=1 & bit3=0).

2.If this Master Console is placed in the Night mode, all incoming calls will be directed to TAS or a Night Connection Fixed station.

3.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.

4.The maximum number of Attendant Consoles (Attendant Consoles) should be assigned by the ASYD command, SYS 1, INDEX 9.

3.Data Entry Instructions

MODE

Enter the desired Attendant Console to be operated as a master.

1 = Attendant Console which is assigned as RT = 901(ATT) by the ATRK command. (MATN)

2 = Attendant Console which is assigned as RT = 915 (NATT) by the ATRK command. (NATN)

(MODE)

1/2

TENANT NUMBER

(TN)

ATTENDANT NUMBER (ATN)

1-16

REMARKS

ATN

Enter desired Attendant Console number assigned by the ATRK command.

CHAPTER 4 NDA-24298

Page 588

Issue 1