NEC NDA-24298 manual B4, b5, Agent Anywhere, Acdp Service is used

ASYDL : Assignment of System Data into Local DM (LDM)

SYSTEM	SYSTEM	DATA		BIT
			CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX					SYSTEM DATA CONTENTS
TYPE		00 - FF
	(INDEX)
(SYS)		(Hex)	DATA		BIT
	512 - 1535
			0/1
					b0	0/1 = -/MC0 with LAN interface is used
	834				b1	0/1 = -/MC1 with LAN interface is used
					b3 ~ b7	Not used
	835 ~ 863					Not used
					b0	0/1 = Built-in IP, ACDP is not used/used
						Output the system message when TCP-IP connection
					b1	is disconnected.
						0/1 = Effective/Ineffective
						AGENT ANYWHERE
					b2	0/1=Out of Service/In Service
						Note: This data is effective only when Multiple
	864					ACDP Service is used.
					b3	Multiple ACDP
						0/1 = Out of service/In service
						Maximum number of SMFN port
					b4, b5	00 = 2 port (standard)
						01 = 8 port
					b6	FLF error detail indication
						0/1 = Out of service/In service
1
					b7	Not used
					b0
					b1	Fusion Point Code (FPC) of the node providing IP.
					b2	(Assign 0 when the ACD service is activated in the
	865				b3	self node only)
					b4	FPC: 1 ~ 253 (01 Hex. - FD Hex)
					b5	Note: This data is necessary at all nodes. Assign
					b6	the self FPC at the terminating node.
					b7
					b0
					b1	Fusion Point Code for Centralized ACDP
					b2	Valid entries 1 - 253 (1h - FDh)
	866				b3	This index assigns the Centralized Fusion Point Code
					b4	for ACDP.
					b5	(For non-Fusion ACDP, assign 00.)
					b6	Note 1, Note 2
					b7

Note 1: This data is necessary at all nodes. Assign the self FPC at the terminating node.

Note 2: When OAI and ACD functions are used together in a Netfusing network, enter the same FPC value in INDEXes 865 and 866.

CHAPTER 4 NDA-24298

Page 188

Issue 1