NEC NDA-24298 manual Aldn Assignment of Listed Directory Number

ALDN : Assignment of Listed Directory Number

ALDN: Assignment of Listed Directory Number

1.General

This command assigns the Listed Directory Number (LDN) which allows a Direct Inward Dialing (DID) call to terminate to Attendant Consoles.

2.Precautions

1.When the LDN number assigned by this command is dialed from PSTN, the call terminates to Attendant Consoles during the Day mode, and redirects to a station or outside party in the Night mode.

2.The numbering of the LDN assigned by this command must conform to the numbering plan data. The ANPD command and the ASPA command (SRV=STN)

3.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data of this command is common for all tenants (ASYD command, SYS1, INDEX92, bit3=1), assign TN parameter as data “1” for all tenants.

The number of station number (STN) digits is designated by the ASYD command, SYS1, INDEX16.

3.Data Entry Instructions

LDN

Enter desired DID number to terminate the call to Attendant Console in the Day mode.

TYPE

The Night mode destination of the LDN 0 = No night transfer

1 = STN

2 = DC (Destination Number including access code.)

3 = ADC

TENANT	LISTED DIRECTORY	TYPE	STN	DC	ADC
NUMBER	NUMBER (LDN)
				MAXIMUM 8 DIGITS	4 DIGITS
(TN)	MAXIMUM 5 DIGITS

STN

This parameter appears when TYPE = 1 (STN).

Enter station number. (Specific ATTCON number assigned by the ASAT command cannot be set.)

DC

This parameter appears when TYPE = 2 (DC).

Enter the outside party number.

ADC

This parameter appears when TYPE = 3 (ADC).

Enter the Abbreviated Digit Code assigned by the ASPD command.

NDA-24298CHAPTER 4

Page 345

Issue 1