NEC NDA-24298 manual Aarp Assignment of Area Code Restriction, Flag, Rsc

AARP : Assignment of Area Code Restriction

AARP: Assignment of Area Code Restriction

1.General

This command assigns the area/office code of Toll Restriction - 3/6 digits in conjunction with ATDP command.

2.Precautions

1.This command is used when restriction data is assigned to RES E 2 (Toll Restriction is required) in the ARSC command or in the ARRC command.

3. Data Entry Instructions

FLAG

Select either 3 Digits or 6 Digits check box.

RES

0 = Area/Office code is restricted.

1 = Area/Office code is allowed.

OUTGOING	ROUTE	FLAG OF 3 OR	DESTINATION
ROUTE	RESTRICTION	6 DIGITS	(AREA/OFFICE)	RESTRICTION	REMARKS
NUMBER	CLASS (RSC)	(FLAG)	CODE (DC)	DATA (RES) 0/1
(OGRT)	0-15	3 Digits/6 Digits	MAX. 6 DIGITS

RSC

RSC assigned by the ARSC command.

DC

DC should not include the access code.

Note: In case the data has already been assigned when “Get” button is executed after checking “6 Digits” parameter and entering DC E 000000, “Del” button is not valid while “Set” button is to be effective. Then the Restriction data can be changed (overwritten) by “Set” button.

CHAPTER 4 NDA-24298

Page 384

Issue 1