NEC NDA-24298 manual ASLU1 Assignment of Slumber Time Data

ASLU1 : Assignment of Slumber Time Data 1

ASLU1: Assignment of Slumber Time Data 1

1.General

This command assigns the data related to the Slumber Time - Do Not Disturb service feature.

2.Precautions

1.The call terminating to the slumber group is forwarded to an Attendant Console or an Announcement trunk (DAT circuit card) with a predetermined slumber time.

2.The station numbers belonging to the slumber group are assigned by the ASLU1 command.

3.The slumber time period and the forwarded destination are assigned by the ASLU2 command.

4.The G parameter on this command is intermediate data to assign the ASLU2 command.

5.Denial of the Slumber Time - Do Not Disturb service feature can be assigned by the following commands:

(a)ARTD command, SLOV = 1 is assigned for trunk route or

(b)ASFC command SFI = 107, RES = 1 is assigned for the class of the originating station

3.Data Entry Instructions

G

Enter data in the G parameter. Multiple numbers of STN can be assigned to a slumber group number.

TENANT NUMBER (TN)

STATION NUMBER

(STN)

SLUMBER GROUP

NUMBER

(G)

1-7

REMARKS

STN

Enter the station number of the slumber group.

NDA-24298CHAPTER 4

Page 749

Issue 1