NEC NDA-24298 manual Acpncn Assignment of Calling Party Number Conversion for NDM

ACPNCN : Assignment of Calling Party Number Conversion for NDM

ACPNCN: Assignment of Calling Party Number Conversion for NDM

1.General

This command assigns skip and additional digits information for Outgoing Logical Route Number. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.When the calling party number that is more than 8 digits including the office code (ARNP, RT=0) is received from CCIS line, the calling party number is sent as Physical Station Number through CCIS line. Therefore, Physical Station Number must be assigned in RCPN parameter to recognize the calling party number.

2.When the system is upgraded from non-fusion system to fusion system, Physical Station Number/ Telephone Number written in LDM programmed in ACPNCL command should be deleted and the new Telephone Number must be assigned using ACPNCN command unless those numbers are identical with Telephone Numbers to be written NDM (If the numbers are not deleted, the system detects the wrong number data or does not detect the number data since the fusion system reads out the NDM data).

3.Data Entry Instruction

RCPN

Determine the number to be recognized in the received calling party number.

ADD

Enter the number of digit to be entered in ACPN parameter.

OUTGOING	RECEIVED CALLING		NUMBER OF	NUMBER OF	CALLING PARTY
LOGICAL
			DIGIT TO BE	ADDITIONAL
ROUTE	PARTY NUMBER				NUMBER TO BE ADDED	REMARKS
			SKIPPED	DIGIT CODE
NUMBER	(RCPN)				(ACPN)
			(SKIP)	(ADD)
(OGLGRT)	Max. 24 digits				Max. 24 digits
1-899			0-24	0-24
		SKIP			ACPN

Enter desired number of digit to be	Enter desired additional numbers to
skipped from the received calling party	the received calling party number
number.	within 24 digits.

NDA-24298CHAPTER 4

Page 821

Issue 1