NEC NDA-24298 manual Remarks Function, SMDR2

ARTD : Assignment of Route Class Data

RT

REMARKS

FUNCTION

	Line Signal
	0	=	Loop
	1	=	Ground Start	C.O. Line
	2	=	CDH
	3	=	Caller ID (Loop)
	4	=	Loop
15 LSG	5	=	E&M	Tie Line
	6	=	DX
	7	=	24V4
	8	=	Loop DID	9 - 11 = Not used

12= Speech Line (for CCIS No. 7 or Bch of ISDN)

13= Signal Line (for CCIS No. 7 or Dch of ISDN) 14-15 = Not used

16	SMDR2 Detailed Billing Information																			See Figure 4-15and
																				Table 4-20.
17	H/M		Hotel Service in CCIS No. 7
			0	=	Out of Service	1	=	In Service
18	MC												0		0	0		0	0 Always assign data “0.”
19	ANI		E911 - ANI Service
			0	=	Out of Service	1	=	In Service
20	D												0		0	0		0	0 Always assign data “0.”
21	MSB												0		0	0		0	0 Always assign data “0.”
22	MSW												0		0	0		0	0 Always assign data “0.”
23	TR		0	=	–															For MPC signaling.
			1	=	ICPT transfer by group-II signals used.
							Table 4-20 SMDR2
				CONTENTS/INPUT				0	1	2	3	4		5	6		7	8	9	10	11	12	13	14	15
		0-Detailed billing is not required for incoming						⋅		⋅	⋅			⋅
		calls.
b0
		1-Detailed billing is required for incoming							⋅		⋅		⋅			⋅
		calls.
		0-Detailed billing is required for toll and local						⋅	⋅		⋅		⋅
		outgoing calls.
b1
		1-Detailed billing is required only for toll								⋅	⋅			⋅		⋅
		outgoing calls.
		0-
b2,3		1-Metering pulses are used.										⋅		⋅ ⋅		⋅
		2-
		3-

NDA-24298CHAPTER 4

Page 521

Issue 1