NEC NDA-24298 manual B0~ b7

ASYDL : Assignment of System Data into Local DM (LDM)

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX					SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	512 - 1535				BIT
			0/1
					b0	Fusion Centralized SMDR Service (Polling Method)
						0/1 = No/Yes
						SMDR for Fusion Network station-to-station calls
					b1	0/1 = All Station Calls/Fusion Station Calls only
						Note: Data valid only when ASYDL Index 512 is set.
						Valid for IPX Version 2 software or higher.
	576
					b2	SMDR Interface Type
						0/1 = RS232C/LANI
						Output the System Message related to connection
					b3	down when the system changeover occurs on LAN
						Interface for SMDR.
						0/1 = Invalid/Valid
					b4 ~ b7	Not used
						FPC (Fusion Point Code) of the Center node (CN) for
						the Centralized SMDR (Centralized Billing-Fusion).
						FPC: 1-253 (01 Hex-FD Hex.)
1	577				b0~ b7	Note: Data 01 Hex-FD Hex should be assigned at
						the Local Node (LN) for the Centralized
						Billing-Fusion. Data “00” must be fixedly
						assigned at the Center Node (CN) of
						Centralized Billing-Fusion.
						Centralized Billing-Fusion output text format of
					b0	SMDR A
						0/1 = ICS format/IPX format
	578				b1 ~ b3	Not used
					b4	0/1 = SMDR A Apparatus with LAN interface is not
						used/used. Note
					b5 ~ b7	Not used
						Centralized Billing-Fusion output text format of
					b0	SMDR B
						0/1 = ICS format/IPX format
	579				b1 ~ b3	Not used
					b4	0/1= SMDR B Apparatus with LAN interface is not
						used/used. Note
					b5 ~ b7	Not used

Note: Assign “1” at the node to which SMDR with LAN interface is connected. If not connected, this data setting is fixed to “0.”

CHAPTER 4 NDA-24298

Page 178

Issue 1