NEC NDA-24298 manual Aosp Assignment of Outgoing Selection Pattern, Add

AOSP : Assignment of Outgoing Selection Pattern

AOSP: Assignment of Outgoing Selection Pattern

1.General

This command assigns skip and additional digits information for Outgoing Selection Translation Pattern Number (PNO).

2.Precautions

1.Before using this command, make sure that an Outgoing Selection Translation Pattern Number (PNO) has been assigned in the ASTP command.

2.The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTP/AOSP command. Since the additional number and skip digits can be assigned by the AOPR/AADC command for LCR/LCRS method, the ASTP/AOSP command may not be required.

3.Data Entry Instructions

PNO

Enter the PNO assigned by the ASTP command.

ADD

Enter the number of digits to be entered in DC parameter.

OUTGOING SELECTION	NUMBER OF DIGITS	NUMBER OF ADDITIONAL	ADDITIONAL DIGIT INFORMATION
TRANSLATION PATTERN NUMBER	SKIPPED	DIGITS
			(DC)
(PNO)	(SKIP)	(ADD)
			MAXIMUM 4 DIGITS
1-15	0-24	0-4

SKIP

Enter desired skip digits if required.

DC

Enter desired additonal numbers (maximum 4 digits).

NDA-24298CHAPTER 4

Page 289

Issue 1