NEC NDA-24298 manual Set to 6 sec, Set to 4 sec

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX					SYSTEM DATA CONTENTS
TYPE		00 - FF
	(INDEX)		DATA
(SYS)		(Hex)
	0 - 511			BIT
			0/1
				b0	Register Inter Digit Timer:
				b1	Miscellaneous Timer Counter (MTC) is to				The interval
					be assigned a value from 0 Hex to F Hex
				b2					between dialed
					(0-15).
									digits.
									Timer Value Setting
					ORT SEIZURE		“3”	“2”	is MTC ⋅ 2 sec.
	129			b3					Note: When this
					DIAL PULSE
									data is 00
									Hex, default
									data is
									automatically
			0	b4
									set to 6 sec.
			0	b5	Not used

0b6

0b7

1		b0	Sender Connection Acknowledgment	For calls over
			Timer:	senderized Tie
		b1
				Lines, the sender
		b2	Miscellaneous Timer Counter (MTC) is to
				requires an ACK
			be assigned a value from 0 Hex to F Hex
				signal from the
			(0-15).
				distant PBX before
				it can send digits.
			OGT START	This timer specifies
				how long the sender
		b3
130			WINK SIGNAL	must wait.
				Timer Value Setting
				is MTC ⋅ 2 sec.
				Note: When this
	0	b4
				data is 00
0		b5	Not used	Hex, default
				data is
	0	b6
				automatically
0		b7		set to 4 sec.

CHAPTER 4 NDA-24298

Page 108

Issue 1