NEC NDA-24298 manual General

AADCL : Assignment of Additional Digit Translation Data for LDM

AADCL: Assignment of Additional Digit Translation Data for LDM

1.General

This command assigns additional digit information for Least Cost Routing (LCR) activating via Fusion Link. This data is written in Local Data Memory (LDM).

2.Precautions

1.Before using this command, confirm that a Pattern Number Location (PNL) has been assigned in the AOPRL command.

2.The applicable number of additional digit (DC) varies depending on the PNL data assigned by the AOPRL/AUNEL command. When the AOPRL command is assigned, and additional digit is sent to out- side of the Node, a maximum of 24 digits of DC is available. When the AUNEL command is assigned, a maximum of 4 digits of DC is available.

3.Data Entry Instructions

PNL

Enter the PNL assigned by the AOPRL command with a range 1-999, or by the AUNEL command with a range 1-127.

PATTERN NUMBER		ADDITIONAL DIGIT INFORMATION
LOCATION		(DC)	REMARKS
	(PNL)	MAX. 24 DIGITS
1-999

DC

Enter DC additional numbers (not including the access code for LCR) to be applied to the transmitted number.

NDA-24298CHAPTER 4

Page 323

Issue 1