NEC NDA-24298 manual Acbc Assignment of Call by Call Service Data, AT&T Acbc, Sdn

ACBC : Assignment of Call by Call Service Data

ACBC: Assignment of Call by Call Service Data

1.General

This command assigns the Call by Call Information for an ISDN Network.

2.Precautions

1.Before assigning data, assign the Outgoing Route Selection Pattern Number (OPR) using the AOPR com- mand.

2.Table 4-28provides the applicable data assignment for each ISDN switch.

Table 4-28 Data Assignments for ISDN Switch

		AT&T			NT
ACBC
	Feature	Service Access	Service Access	Public, etc.	Public, etc.
	Access	(SDN)	(MEGACOM, etc.)
TDPTN	0 - 7	0 - 7	0 - 7	0 - 7	0 - 7
OPR	0 - 4095	0 - 4095	0 - 4095	0 - 4095	0 - 4095
RA	0 - 7	0 - 7	0 - 7	0 - 7	0 - 7
MD	0	0	0	0	0
TON	1 / 2	1 / 2	1 / 2	1 / 2	1 / 2
INTF	5	5	5	7	7
SERV	0	1	1	0	0
CODE	0 / 5 / 6	1	2 / 3 / 5 / 6	0 / 1 / 2 / 4 / 5 / 8	3
BAND	-	0 - 9	-	-	0 - 9
SCC	3 digits	3 digits	-	-	-

3.The data assignment of the INTF parameter of this command should correspond to the INT parameter of the ARTD command.

4.The data assignment of the TON parameter of this command should correspond to the one assigned by the ARTI command.

NDA-24298CHAPTER 4

Page 831

Issue 1