NEC NDA-24298 manual Case of dual output ports service, assign 1 to, Both ports, Smdr

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX							SYSTEM DATA CONTENTS
TYPE		00 – FF
(SYS)	(INDEX)	(Hex)	DATA
	0 – 511				BIT
			0/1
					b0	Message Center Interface Output Designation
					b1	“1” is to be assigned to each bit corresponding to the Port Number
						of the IOC Circuit Card.
					b2
					b3	b0 = Port 0		b4 = Port 4
						b1 = Port 1		b5 = Port 5
	29				b4
					b	b2 = Port 2		b6 = Port 6
					5
					b6	b3 = Port 3		b7 = Port 7
						Note:	In the case of dual output ports service, assign “1” to
1					b7
							both ports.
						Mounting capacity of Data Memory (DM)
	30					For IPX, assign 02 Hex.
						Note:	Assign 04H for the extensive capacity and 06H for using
							PCS.
						Mounting capacity of Common Memory (CM) 1~4 Mbyte
						(01~04)
	31					For IPX, assign 02 Hex.
						For IPX with OAI name display, assign 04H.
			0		b0	Not used
			1		b1	Record Tenant Data for SMDR
			1		b2	Record Selected Trunk type for SMDR
			0		b3	Not used
			0		b4
1	32					When Recording Called Numbers for SMDR:
					b5	0/1 =	The ACC Code is not to be included/The ACC Code is to
							be included.
					b6	When Recording Abbreviated Digit Codes for SMDR:
						0/1 = The Digits are Recorded/Digits Dialed are Recorded.
					b7	SMDR
						0/1 = Out/In Service

CHAPTER 4 NDA-24298

Page 74

Issue 1