NEC NDA-24298 manual Aatc Assignment of Authorization Code Data

AATC : Assignment of Authorization Code Data

AATC: Assignment of Authorization Code Data

1.General

This command assigns the Authorization Code that is used for Authorization Code/Forced Account Code/Pad Lock, and Remote Access to system features.

2.Precautions

1.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX 94, bit3=1), assign TN parameter as data “1” for all tenants.

2.When data “1 (Restricted)” is entered in the ACR parameter, the RSC and SFC parameter is specified as the temporary class. The trunk connection or service feature capability of the temporary class is referred to by the data of the ARSC command and the ASFC command.

3.When data “2 (Allowed)” is entered in the ACR parameter, neither the RSC nor SFC parameter appears. In this case, the trunk connection or service feature is allowed regardless of the ARSC /ASFC data.

4.A maximum of 10 digits of DC can be entered as the Authorization Code.

5.Assign data “0” (Separate) in bit 6, INDEX93, SYS1 of the ASYD command to specify the maximum number of digits for the command AMND.

6.Check sum (2 digits) for the Authorization Code can be arranged by the data assignment in INDEX 12, 13, and 14 of the ASYD command.

3.Data Entry Instructions

ACR

1 = Restricted

2 = Allowed

TENANT	DIGIT CODE OF ID (DC)		AUTHORIZATION	ROUTE	SERVICE
NUMBER		MAXIMUM 10 DIGITS	CODE	RESTRICTION	FEATURE
(TN)			RESTRICTION	CLASS (RSC)	CLASS
			(ACR) 1/2	0-15	(SFC)
					0-15
			1
			2

REMARKS

These parameters don't need to be entered when parameter Authorization Code restriction is 2.

CHAPTER 4 NDA-24298

Page 788

Issue 1