3Com MSR 50, MSR 30 manual MAC Authentication Configuration Commands, Display mac-authentication

MAC AUTHENTICATION

132 CONFIGURATION COMMANDS

n	MAC authentication is not supported on the fixed layer 2 interface of FIC-4FSW,
	DFIC-9FSW and MSR 20 Series Products.

display mac-authentication

Syntax display mac-authentication [ interface interface-list]

View Any view

Parameter interface interface-list: Specifies an Ethernet port list, in the format of

{interface-type interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10> indicates that you can specify up to 10 port ranges. A port range defined without the to interface-type interface-number portion comprises only one port. With an interface range, the end interface number and the start interface number must be of the same type and the former must be greater than the latter.

Description Use the display mac-authenticationcommand to display global MAC authentication information or MAC authentication information about specified ports.

Example # Display global MAC authentication information.

<Sysname> display mac-authentication MAC address authentication is enabled.

User name format is MAC address, like xxxxxxxxxxxx

Fixed username:mac

Fixed password:not configured

Offline detect period is 300s

Quiet period is 60.

Server response timeout value is 100s

the max allowed user number is 1024 per slot Current user number amounts to 0

Current domain: not configured, use default domain

Silent Mac User info:
MAC ADDR	From Port	Port Index
Ethernet1/1 is link-up
MAC address authentication is Enabled
Authenticate success: 0, failed: 0
Current online user number is 0
MAC ADDR	Authenticate state	AuthIndex