3Com MSR 50, MSR 30 manual Default entity vad-on, Undo default entity vad-on, Vad-on

2569

g729: Specifies the packetization period for g729 codec. It ranges from10 to 180 milliseconds and defaults to 30 milliseconds.

time-length: Packetization period for a codec.

Description Use the default entity payload-sizecommand to configure the default packetization period for a codec.

Use the undo default entity payload-sizecommand to restore the default.

Example # Set the packetization period for G.711 codec to 30 milliseconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] default entity payload-size g711 30

default entity vad-on

Syntax	default entity vad-on
	undo default entity vad-on
View	Voice dial program view
Parameter	None
Description	Use the default entity vad-oncommand to globally configure enabling silence
	detection as the default value.
	Use the undo default entity vad-oncommand to restore the fixed value (i.e.
	disabling the silence detection) to be the default value.
	By default, the silence detection is disabled.
	The default entity vad-oncommand is used to globally enable silence detection
	and make it as the default setting. After the configuration, all the voice entities
	and newly created voice entities on this router, which have not been configured
	with this function, will inherit this configuration (note that G. 711 does not
	support silence detection).
Related command:	vad-on.
Example	# Enable the silence detection globally.
	<Sysname> system-view
	[Sysname] voice-setup
	[Sysname-voice] dial-program
	[Sysname-voice-dial] default entity vad-on