Panasonic WV-NS202 Preset ID 0-9, A-Z, Auto focus, Default: OFF, Dwell time, Super Dynamic

[Preset ID (0-9, A-Z)]

Enter the preset ID to be displayed on images. The pre- set IDs can be applied to each preset position. Available characters: 0-9, A-Z and the following

marks.

!"#$%&‘()*+,-./:; =?

Number of characters for the preset ID: 0 - 16 char-

acters

Default: None (blank)

Note:

The entered preset ID will be displayed next to the preset position number on the pull-down menu. When "ON" is selected for "Preset ID", the preset ID will be displayed on images.

[Auto focus]

Select "AUTO" or "OFF" to determine whether to enable or disable the auto focus function after the camera has moved to a preset position. This function can be applied to each preset position.

AUTO: The auto focus function will be activated after moving to a preset position.

OFF: Does not activate the auto focus function after moving to a preset position.

Default: OFF

Note:

When the preset position is set to shoot the following objects, it is recommended to select "OFF" since the camera can focus on them quickly.

•An object whose depth never changes

•An object whose contrast is low

•An object with high luminance such as a spotlight

[Dwell time]

Select a dwell time (duration the camera stops for at each preset position) for the preset sequence operation. The selected dwell time will be applied to all preset posi- tions.

5 sec/10 sec/20 sec/30 sec Default: 10 sec

[Super Dynamic 3]

Select "ON" or "OFF" to determine whether to turn on or off super dynamic 3 (SUPER-D 3). This function can be applied to each preset position.

ON: Turn on SUPER-D 3

OFF: Turn off SUPER-D 3

Default: OFF

[Mask area]

When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas.

Refer to page 35 for descriptions of how to mask.

ZOOM buttons

FOCUS buttons

BRIGHTNESS buttons

Control pad/buttons

Refer to pages 6 and 7 for descriptions of how to oper- ate these buttons/pad.

Panning, tilting and zooming operations can also be car- ried out on the [Image/Position] tab.

[CLOSE] button

Click this button to close the "Preset No." setup menu.

37