Set mask areas

When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas.

Step 1

Display the setup menu of "Image Adjust". (page 32)

Step 2

Click the [START] button of "Mask area".

Borders will appear and the image displayed on the [Image/Position] tab will be divided into 48 (6x8).

Step 3

Click the divided areas to be masked.

The clicked areas will be masked and will become white.

To cancel masking, click the area again.

Step 4

Click the [END] button after completing masking areas.

The borders on the image displayed on the [Image/ Position] tab will disappear.

Note:

When the [RESET] button is clicked, masking for all the masked areas will be canceled.

35

Page 35
Image 35
Panasonic WV-NS202 operating instructions Set mask areas, Step