Configure the settings relating to the authentication [Authentication setup]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con- figured on this page.
The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the "Authentication setup" page. (☞ page 15)
The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered.
Note:
When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IP address (PC), access to the camera will be denied for a while.
[User authentication]
Select "ON" or "OFF" to determine whether or not to authenticate the users.
Default: OFF
[User name]
Enter a user name.
Number of characters for the user name: 1 - 32 char-
acters
Default: None (blank)
[Password] [Retype password]
Enter the password.
Number of characters for the password: 4 - 32 char-
acters
Default: None (blank)
Note:
When the user name already in use is entered and the [SET] button is clicked, the respective user infor- mation will be overwritten.
[Access level]
Select the access level of the user from the following.
1.Administrator: Allowed all available operations of the camera.
2.Camera control: Allowed to display images from the camera and to control the camera. The camera set- ting configuration is unavailable.
3.Live only: Only displaying live images is available. The camera setting configuration and camera con- trol are unavailable.
Default: 3. Live only
Note:
By clicking [i] of "User name check", the registered user can be selected and the selected user’s infor- mation can be checked.
The registered user will be displayed with the access level. (Example: admin [1])
To delete the registered user, click the [DEL] button after selecting the user to be deleted.
Important:
If all users whose access level is "1. Administrator" are deleted, it will be impossible to configure the set- tings.
54
