Step 5
Select the detection sensitivity from the following. The selected detection sensitivity will be applied to all the VMD areas.
High/Middle/Low
Default: Middle
Step 6
Click the [SET] button after completing the settings.
Important:
The setting will not be applied unless the [SET] but- ton is clicked.
Delete the VMD area set for the designated preset position
Step 1
Display the VMD area setup window of the preset posi- tion number whose VMD area is to be deleted.
(☞ page 50)
Step 2
Click the [Delete] button respective to the area to be deleted.
→ The outline of the area will disappear.
Step 3
Click the [SET] button.
→ The deletion will be completed.
Important:
The deletion will not be completed unless the [SET] button is clicked.
51
