Panasonic WV-NS202 Initialize/restart the camera Initialization, Initialize HTML data, Restart

Models: WV-NS202

1 79
Download 79 pages 20.1 Kb
Page 68
Image 68
Initialize/restart the camera [Initialization]

Initialize/restart the camera [Initialization]

Click the [Initialization] tab of the "Maintenance" page. (page 15)

Initialization of the settings and data of the camera and restarting of the camera can be performed on this page.

[Initialize camera setup data (Except network and preset setup data)]

Click the [Execute] button to reset the settings to the default. Note that the network settings and the preset position setting will not be reset.

It is impossible to operate the camera for around 2 minute after the initialization.

[Initialize HTML data]

Click the [Execute] button to reset the HTML files to the default. It is impossible to operate the camera for around 2 minute after the initialization.

[Initialize setup data and HTML data]

Click the [Execute] button to reset the settings of the camera and the HTML files to the default. Note that the network settings and the preset position setting will not be reset. It is impossible to operate the camera for around 2 minute after the initialization.

[Restart]

Click the [Execute] button to restart the camera. It is impossible to operate the camera for around 2 minute after restarting the camera.

Notes:

To initialize the network settings (page 58), do the following.

1.Turn off the power of the camera.

2.Turn on the power of the camera while holding down the [INITIAL SET] button of the camera, and wait around 5 seconds without releasing the [INITIAL SET] button.

3.Wait around 1 minute after releasing the button. The camera will start up and the settings includ- ing the network settings will be initialized.

When the notifiction function is on, notification will be provided to the registered addresses (mail address or IP address) when the SD memory card has failed to mount after the restart or when the inserted SD memory card is locked. (pages 52 and 53)

[Position refresh]

The camera position can be refreshed. When the cam- era has moved from the correct home/preset position during normal use, or when it has been inadvertently moved while turning on the power of the camera, use this function to correct the camera position.

It is impossible to operate the camera during the posi- tion refresh process (for around 2 minute).

Important:

The camera position may inadvertently be changed when installing the camera. It is recommended to carry out the position refresh when registering the preset positions after the installation.

68

Page 68
Image 68
Panasonic WV-NS202 Initialize/restart the camera Initialization, Initialize HTML data, Initialize setup data and HTML data