Monitor Images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP setup software in the address box of the browser. (Example: http://192.168.0.10)
Important:
•When the HTTP port number is changed from "80", enter "http://IP address of the camera + : (colon) + port number" in the address box of the browser, for example, "http://192.168.0.11:8080".
•When the PC is in a local network, configure the web browser to bypass the proxy server for the local address.
Step 3
Press the [Enter] key on the keyboard.
→The "Live" page will be displayed.
Notes:
•When "ON" is selected for "User Authentication", the authentication window will be displayed before dis- playing live images for the user name and password entries. The default user name and password are as follows.
User name: admin
Password: 12345
When accessing the camera without changing the default password, the
To enhance the security, change the password for the user "admin". It is recommended to change this password periodically.
•When "Unicast port (AUTO)" or "Unicast port (MAN- UAL)" is selected for "Transmission type" (☞ page 27), up to 8 users can access the camera concur- rently. Depending on the set values for "Total bit rate" and "Max bit rate (per 1 client)", the maximum concurrent access number may be less than 8 users. When 8 users are concurrently accessing, the access limit message will be displayed for users who subsequently attempt to access.
•When "ON" is selected for
In this case, the refresh interval will be limited.
<Refresh interval (MPEG-4)>
•When "ON" is selected for
JPEG (QVGA): 10 fps
•When "OFF" is selected for
The refresh interval may be longer depending on a network environment, PC spec, photographic sub- ject, access traffic, etc.
Important:
When displaying multiple
Refer to the following page for further information about the "Live" page.
4
