Panasonic WV-NS202 operating instructions Step, Click the Execute button of Access images

•After formatting the SD memory card, the available size may be smaller than the total size since the default directory is automatically created in the SD memory card.

•Compatible SD memory card is as follows. SD memory card manufactured by Panasonic (64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2GB)

Copy images saved on the SD memory card onto the PC [SD memory card images]

Click the [SD memory card] tab on the "Basic setup" page. (☞ page 15)

The following are descriptions of how to copy images saved on the SD memory card onto the PC.

It is necessary in advance to select "Allow" for "FTP access" on the [Network] tab of the "Network setup" page (☞ page 59).

Important:

•It is impossible to copy images saved on the SD memory card when another user is simultaneously obtaining images from the SD memory card.

•Depending on the settings of a proxy server or a firewall, images may not be obtained via a network. In this case, refer to the network administrator.

Step 1

Click the [Execute] button of "Access images".

→The user authentication window will be displayed.

Step 2

Click the [OK] button after entering the user name and the password.

→The folder in which images are to be saved will be displayed.

Step 3

Copy the desired images or the folder onto the PC.

It is impossible to display the image to be saved on this window. Display the image after saving it on the PC.

Note:

When logging in the camera to obtain images, drive B will be displayed first.

Images are saved in different directories according to "Save trigger" ("Save trigger" - "Basic setup"-"SD memory card".).

Move to the directory corresponding to the desired images and obtain them.

Refer to page 78 for further information about the directory structure.

24