Panasonic WV-NS202 Configures the multi-screen settings Multi-screen setup, IP address

Configures the multi-screen settings [Multi-screen setup]

The cameras to be used for the multi-screen display can be registered on this page. Refer to page 9 for descriptions of how to display images on a multi-screen.

The following cameras are applicable for the multi-screen display. (As of October, 2006)

WV-NS202, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-NS320 series

[Camera title]

Enter the title of the camera. The entered camera title will be displayed on a multi-screen.

Number of characters for the camera title: 0 - 20

characters

Note:

When selecting a 16 split-screen, some characters of the camera title to be displayed may not be dis- played.

[IP address]

Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can be regis- tered as a group and up to 4 groups (16 cameras) can be registered.

When the HTTP port number for the camera had been changed, enter as follows: "IP address of the

camera:port number", for example "192.168.0.10: 8080".

Number of characters for the IP address: 1 - 128

characters

Note:

When using the host name, it is necessary to config- ure the DNS settings of the PC to be used for the multi-screen display. (☞ page 59)

42