Panasonic WV-NS202 Camera motion on alarm, Terminal alarm, Default: OFF, VMD alarm

Models: WV-NS202

1 79
Download 79 pages 20.1 Kb
Page 44
Image 44
■Camera motion on alarm

Configure the settings relating to the camera action at an alarm occurrence

Click the [Alarm] tab on the "Alarm setup" page. (page 15)

Camera motion on alarm

The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages 43, 46 and 47 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal.

[Terminal alarm 1]

Select an action to be taken when a terminal alarm 1 is detected from the following.

OFF: Does not take any action even when a terminal alarm 1 is detected.

1-64:When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 1 is detected.

Auto track: When a terminal alarm 1 is detected, the camera will move to the home position and start the auto tracking.

Alarm permission: Receives a terminal alarm 2 and 3 while detecting a terminal alarm 1.

VMD permission: Permits to detect video motion (VMD function) while detecting a terminal alarm 1.

Access permission: Permits access from all the users registered on the "User" page (page 54) while detecting a terminal alarm1. Permits access from users whose access level is "1" while no detecting a terminal alarm 1.

Default: OFF

Important:

When "Access permission" is selected for "Terminal alarm 1", select "ON" for "User authentication" on the [Authentication] tab (page 54).

[Terminal alarm 2]

Select an action to be taken when a terminal alarm 2 is detected from the following.

OFF: Does not take any action even when a terminal alarm 2 is detected.

1-64:When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 2 is detected.

Auto track: When a terminal alarm 2 is detected, the camera will move to the home position and start the auto tracking.

Default: OFF

[Terminal alarm 3]

Select an action to be taken when a terminal alarm 3 is detected from the following.

OFF: Does not take any action even when a terminal alarm 3 is detected.

1-64:When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 3 is detected.

Auto track: When a terminal alarm 3 is detected, the camera will move to the home position and start the auto tracking.

Default: OFF

"AUX" is the terminal that can be switched between "OPEN" and CLOSE" from the "Live" page. It is useful when controlling the connected external device. For example, when it is necessary to control lighting at the camera location, connect a lighting control device to the terminal (AUX OUT) of the camera to remotely control lighting at the camera location.

[VMD alarm]

Select an action to be taken when a VMD alarm is detected from the following.

OFF: Does not take any action even when a VMD alarm is detected.

1-64:When the registered preset position is selected, the camera will move to the selected preset position when a VMD alarm is detected.

44

Page 44
Image 44
Panasonic WV-NS202 operating instructions Camera motion on alarm, Default: OFF Terminal alarm, VMD alarm